COMMERCIAL REFRIGERATION SOLUTIONS

From Project Conditions to the Right Refrigeration System

Freskool provides condensing units and unit coolers for medium- and low-temperature systems. Selection starts with actual project conditions, not horsepower, physical size or fan count alone.

Select as a System

Condensing Unit

The compressor and heat-rejection side. Select around load, ambient, refrigerant, voltage and operating point.

Unit Cooler

The indoor evaporator and air-distribution side. Review capacity, evaporating condition, airflow, air throw and defrost.

Walk-In Coolers

Medium-temperature applications for refrigerated storage, retail and foodservice.

Walk-In Freezers

Low-temperature applications with careful attention to evaporating condition, defrost and subfreezing load.

Information Needed for Selection

Share target temperature, refrigeration load, design ambient, refrigerant, voltage, room dimensions, mounting, approximate line length and project schedule.

Walk-In Cooler GuideWalk-In Freezer GuideRequest Engineering Selection

ENGINEERING KNOWLEDGE HUB

Freskool Commercial Refrigeration Solutions

Selection guides, model data and applications for condensing units, unit coolers, refrigeration load, refrigerants and commercial systems. Start with the project question and work toward the inputs needed for engineering selection.

Request Engineering SelectionTechnical Resources

EQUIPMENT SELECTION

From Application to the Right Equipment Family

How to Size a Condensing UnitLoad, temperature, ambient, refrigerant and system matching. Medium vs Low TemperatureChoose the family from the application conditions. How to Match Condensing Unit and Unit CoolerCompare both sides at the same operating point. How to Size a Unit CoolerCapacity, air distribution, defrost and matching. Airflow and Air ThrowRelate the unit cooler to actual room geometry. Defrost SelectionEspecially important in low-temperature applications.

MODEL DATA

Freskool Medium-Temperature Condensing Units

These profiles make model data discoverable without turning horsepower into a false capacity claim. Final selection still depends on refrigeration load and operating point.

BGH22-050A | 2 HPZB15KQ-TF5 | 7.3 m³/h | 1 × 500 mm | 90 kg BGH22-075A | 3 HPZB21KQ-TF5 | 9.9 m³/h | 1 × 500 mm | 90 kg BGH22-125A | 5 HPZB38KQ-TF5 | 17.2 m³/h | 2 × 500 mm | 137 kg BGH22-150A | 6 HPZB45KQ-TF5 | 20.9 m³/h | 2 × 500 mm | 137 kg BGH22-200A | 8 HPZB58KQ-TF5 | 25.7 m³/h | 2 × 500 mm | 143 kg View the Full Medium-Temperature FamilyCompare the model family and review current technical data.

ENGINEERING FUNDAMENTALS

Variables That Change Equipment Selection

Refrigeration LoadMore than room size: transmission, infiltration, product and internal loads. R448A vs R449ACompatibility, operating point and project requirements. Voltage and Electrical ServiceConfirm voltage, phase and frequency before finalizing the model. Fixed vs Variable SpeedCompare control strategy against the actual load profile.

APPLICATIONS

Start With How the Space Is Actually Used

Restaurants and Foodservice Convenience Stores Supermarkets Cold Storage Food Processing

BERGSTROM + FRESKOOL

Turn Research Into a Project Selection.

Freskool is Bergstrom’s commercial refrigeration brand. Use these guides to organize the project variables, then confirm equipment selection against current model-specific technical data.

Submit Project Conditions